Bộ điều khiển Deepsea DSE6020
Bộ điều khiển Deepsea DSE6020 MKII - Auto Mains (Utility) Failure Control Module
Hình ảnh bộ điều khiển Deepsea DSE6020
FEATURES
|
|
|
The DSE6010 MKII Auto Start
Control Module and the DSE6020 MKII Auto Mains (Utility) Failure Control Module are suitable for a wide variety of single gen-set applications. Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules give comprehensive engine and alternator protection. This is indicated on a large back-lit LCD icon display via an array of warning, electrical trip and shutdown alarms |
Electronic J1 939 (CAN) and nonelectronic MPU and alternator
sensing engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the modules can be easily adapted to suit a wide range of applications. Through USB Communication both modules can be configured using the DSE Configuration Suite PC Software or through the module's front panel editor |
Using the DSE Configuration Suite
PC Software the controller is easy to use and configure which allows alteration of operating parameters, sequences, timers and alarms. |
KEY BENEFITS
• Automatically transfers between mains (utility) and generator (DSE6020 MKII only) • Hours counter provides accurate information for monitoring and maintenance periods • User-friendly set-up and button layout for ease of use • Multiple parameters are monitored simultaneously which are clearly displayed on a large back-lit icon display • The module can be configured to suit a wide range of applications • Compatible with a wide range of CAN engines, including tier 4 engine support • Uses DSE Configuration Suite PC Software for simplified configuration • Licence-free PC software • IP65 rating (with optional gasket) offers increased resistance to water ingress |
KEY FEATURES
• Large back-lit icon display • Heated display option available • Fully configurable via the fascia or PC using USB communication • Efficient power save mode • 3 phase generator sensing • 3 phase mains (utility) sensing (DSE6020 MKII only) • Generator/load power monitoring (kW, kV A, kV Ar, pf) • Accumulated power monitoring (kW h, kVA h, kVAr h) • Generator overload protection (kW) • Generator/load current monitoring and protection • Breaker control via fascia buttons • Fuel and start outputs, configurable when using CAN • 4 configurable DC outputs • 4 configurable analogue/digital inputs • 6 configurable digital inputs |
• Support for 0-1 0 V & 4-20 mA
oil pressure sensors • Configurable staged loading outputs • CAN, MPU and alternator speed sensing in one variant • 3 engine maintenance alarms • Engine speed protection • Engine hours counter • Engine pre-heat • Engine run-time scheduler • Engine idle control for starting & stopping • Fuel pump control • Real time clock • Battery voltage monitoring • Start on low battery voltage • Configurable remote start input • 1 alternative configuration • Comprehensive warning, electrical trip or shutdown protection upon fault condition • LCD and LED alarm indication • Configurable event log (50) |
SPECIFICATION
|
|
|
DC SUPPLY
CONTINUOUS VOLTAGE RATING 8 V to 35 V Continuous CRANKING DROPOUTS Able to survive 0 V for 50 mS, providing supply was at least 1 0 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking. MAXIMUM OPERATING CURRENT 1 00 mA at 1 2 V, 1 05 mA at 24 V MAXIMUM STANDBY CURRENT 60 mA at 1 2 V, 55 mA at 24 V MAXIMUM SLEEP CURRENT 40 mA at 1 2 V, 35 mA at 24 V GENERATOR & MAINS (UTILITY) VOLTAGE RANGE 1 5 V to 41 5 V AC (Ph to N) 26 V to 71 9 V AC (Ph to Ph) |
FREQUENCY RANGE
3.5 Hz to 75 Hz INPUTS DIGITAL INPUTS A to F Negative switching ANALOGUE INPUTS A to C Configurable as: Negative switching digital input 0 Ω to 480 Ω ANALOGUE INPUT D Configurable as: Negative switching digital input 0 V to 1 0 V 4 mA to 20 mA 0 Ω to 480 Ω OUTPUTS OUTPUT A (FUEL) 1 0 A short term, 5 A continuous, at supply voltage OUTPUT B (START) 1 0 A short term, 5 A continuous, at supply voltage AUXILIARY OUTPUTS C, D, E & F 2 A DC at supply voltage |
DIMENSIONS
OVERALL 21 6 mm x 1 58 mm x 43 mm 8.5’’ x 6.2” x 1 .5” PANEL CUT-OUT 1 84 mm x 1 37 mm 7.2’’ x 5.3” MAXIMUM PANEL THICKNESS 8 mm 0.3” STORAGE TEMPERATURE RANGE -40 °C to +85 °C -40 °F to +1 85 °F OPERATING TEMPERATURE RANGE -30 °C to +70 °C -22 °F to +1 58 °F HEATED DISPLAY VARIANT -40 °C to +70 °C -40 °F to +1 58 °F |
Sản phẩm cùng loại (9)
DSE3110 can
DSE3110-mpu