Bộ điều khiển Deepsea DSE7310

Bộ điều khiển Deepsea DSE7310 MKII - Auto Start Control Module

Bộ điều khiển Deepseea DSE7310

Hình ảnh bộ điều khiển Deepsea DSE7320

 

FEATURES
 
 
 
The DSE7310 MKII is an Auto Start
Control Module and the DSE7320
MKII is an Auto Mains (Utility) Failure
Control Module suitable for a wide
variety of single, diesel or gas,
gen-set applications.
Monitoring an extensive number of
engine parameters, the modules will
display warnings, shutdown and
engine status information on the
back-lit LCD screen, illuminated
LEDs, remote PC and via SMS text
alerts (with external modem)
The DSE7320 MKII will also monitor
the mains (utility) supply. The
modules include USB, RS232 and
RS485 ports as well as dedicated
DSENet® terminals for system
expansion.
Both modules are compatible with
electronic (CAN) and non-electronic
(magnetic pick-up/alternator
sensing) engines and offer an
extensive number of flexible inputs,
outputs and extensive engine
protections so the system can be
easily adapted to meet the most
demanding industry requirements
The extensive list of features
includes enhanced event and
performance monitoring, remote
communications & PLC
functionality. Dual mutual standby is
now available on both the DSE7310
MKII & DSE7320 MKII using RS232
or RS485 communications. This
provides for a simpler and more
convenient installation with more
advanced features such as true
engine hours balancing.
The modules can be easily
configured using the DSE
Configuration Suite PC software.
Selected front panel editing is also
available
KEY FEATURES
 
 
• 4-Line back-lit LCD text display
• Multiple Display Languages
• Five key menu navigation
• LCD alarm indication
• Heated display option available
• Customisable power-up text
and images
• DSENet expansion compatibility
• Data logging facility
• Internal PLC editor
• Protections disable feature
• Fully configurable via PC using
USB, RS232 & RS485
communication
• Front panel configuration with
PIN protection
• Power save mode
• 3 phase generator sensing and
protection
• 3 phase mains (utility) sensing
and protection (DSE7320 MKII
only)
• Automatic load transfer control
(DSE7320 MKII only)
• Generator current and power
monitoring (kW, kvar, kVA, pf)
• Mains current and power
monitoring (kW, kvar, kVA, pf)
(DSE7320 MKII only)
• kW and kvar overload and
reverse power alarms
• Over current protection
• Unbalanced load protection
• Independent earth fault
protection
• Breaker control via fascia
buttons
• Fuel and start outputs
configurable when using CAN
• 6 configurable DC outputs
• 2 configurable volt-free relay
outputs
• 6 configurable analogue/digital
inputs
• Support for 0 V to 1 0 V & 4 mA
to 20 mA sensors
• 8 configurable digital inputs
• Configurable 5 stage dummy
load and load shedding outputs
• CAN, MPU and alternator
frequency speed sensing in one
variant
• Real time clock
• Manual and automatic fuel
pump control
• Engine pre-heat and post-heat
functions
• Engine run-time scheduler
• Engine idle control for starting &
stopping
• Fuel usage monitor and low fuel
level alarms
• Simultaneous use of RS232 and
RS485 communication ports
• True dual mutual standby using
RS232 or RS485 for accurate
engine hours balancing.
• MODBUS RTU support with
configurable MODBUS pages.
• Advanced SMS messaging
(additional external modem
required)
• Start & stop capability via SMS
messaging
• 3 configurable maintenance
alarms
• Compatible with a wide range
of CAN engines, including tier 4
engine support
• Uses DSE Configuration Suite
PC Software for simplified
configuration
• Licence-free PC software
• IP65 rating (with supplied
gasket) offers increased
resistance to water ingress
• Modules can be integrated into
building management systems
(BMS) using MODBUS RTU
KEY BENEFITS
• Automatically transfers between
mains (utility) and generator
(DSE7320 MKll only) for
convenience.
• Hours counter provides accurate
information for monitoring and
maintenance periods
• User-friendly set-up and button
layout for ease of use
• Multiple parameters are
monitored & displayed
simultaneously for full visibility
• The module can be configured
to suit a wide range of
applications for user flexibility
• PLC editor allows user
configurable functions to meet
user specific application
requirements.
 
SPECIFICATION
 
 
 
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
5 V for upto 1 minute
CRANKING DROPOUTS
Able to survive 0 V for 1 00 mS, providing
supply was at least 1 0 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries.
LEDs and backlight will not be maintained
during cranking.
MAXIMUM OPERATING CURRENT
51 0 mA at 1 2 V, 240 mA at 24 V
MAXIMUM STANDBY CURRENT
330 mA at 1 2 V, 1 60 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
1 5 V to 41 5 V AC (Ph to N)
26 V to 71 9 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
1 0,000 Hz (max)
INPUTS
DIGITAL INPUTS A TO H
Negative switching
ANALOGUE INPUTS A & F
Configurable as:
Negative switching digital input
0 V to 1 0 V sensor
4 mA to 20 mA sensor
Resistive sensor
ANALOGUE INPUTS B, C, D & E
Configurable as:
Negative switching digital input
Resistive sensor
OUTPUTS
OUTPUT A & B (FUEL & START)
1 5 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt-free)
AUXILIARY OUTPUTS E, F, G, H, I & J
2 A DC at supply voltage
DIMENSIONS
OVERALL
245 mm x 1 84 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 1 60 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
-40 °F to +1 85 °F
OPERATING TEMPERATURE RANGE
-30 °C to +70 °C
-22 °F to +1 58 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +1 58 °F

 

 

Sản phẩm cùng loại (9)